ABSTRACT:

Radio Frequency Identification (RFID) Card Readers provide a low-cost solution to read passive RFID transponder tags up to 2 inches away. The RFID Card Readers can be used in a wide variety of hobbyist and commercial applications, including access control, automatic identification, robotics navigation, inventory tracking, payment systems, and car immobilization. The RFID card reader read the RFID tag in range and outputs unique identification code of the tag at baud rate of 9600. The data from RFID reader can be interfaced to be read by microcontroller or PC.

            In this project, the RFID module reader typically contains a module (transmitter and receiver), a control unit and a coupling element (antenna). This module is interfaced with the micro controller and when the card is brought near to the RFID module, it reads the data in the card and displays on the LCD. If the data in the card is matched with the data stored in the program memory, then it compares and displays authorized message. If the data is not matched it displays unauthorized.

For authorized message, the door will be opened and closes automatically after a small delay. If it is an unauthorized person it alerts the persons through a buzzer. The RFID module alerts the buzzer whenever it reads the data from the RFID card. The door will drive by DC gear motor by l293d driver. The significant advantage of all types of RFID systems is the non contact, non-line-of-sight nature of the technology. Tags can be read through a variety of substances such as snow, fog, ice, paint, crusted grime, and other visually and environmentally challenging conditions, where barcodes or other optically read technologies would be useless. This project can provide security for the industries, companies, etc.

In this project 7805 is a regulator and it avoids noise spikes in power supply. RFID modem is connected microcontroller through serial port. These RFID modem works under 9600 or 4800 baud rates. 16X2 LCD connected to microcontroller through digital I/O lines.

TECHNICAL SPECIFICATIONS:

HARDWARE:

Micro controller         :           AT89S52

Crystal                        :           11.0592 MHz

LED                            :           5mm Red LED

Serial Driver               :           Max 232

LCD                            :           HD44780 

RFID modem, Buzzer    

DC gear motor(10 R.P.M)

Power supply

Transformer                :           12V step down  

Filter                           :           1000uf/25V

Voltage Regulator      :           7805

SOFTWARE:

Keil micro vision

Proteus

UC flash

APPLICATIONS:

• Security systems
• Banks
• Commercial purpose