Abstract :
According to ancient Greek scripts BIOMETRICS means study of life. Biometrics studies commonly include fingerprint, face, iris, voice, signature, and hand geometry recognition and verification. Many other modalities are in various stages of development and assessment. Among these available biometric traits, Finger Print proves to be one of the best traits providing good mismatch ratio and also reliable. To provide perfect security and to make our work easier, we are taking the help of two different technologies viz. EMBEDDED SYSTEMS and BIOMETRICS.
Firstly discussing about Biometrics we are concentrating on Fingerprint scanning. For this, we are using FIM 3030N high voltage module as a scanner. This module has in-built ROM, DSP and RAM. In this, we can store the fingerprints of up to 100 users. This module can operate in 2 modes i.e., Master mode and User mode. We will be using Master mode to register the fingerprints which will be stored in the ROM present on the scanner with a unique id.
The project is designed to provide absolute security in industries. The persons who are the employees of the industry have to be registered initially as a sign of authentication. Thus, the fingerprints of the person will be scanned and saved in the database. A password will be given to the user along with the fingerprint. Thus, whenever the employee tries to enter into the organization, he has to scan his image to prove that he is an authorized person to the organization. Thus, the fingerprint module scans the image and sends it to the microcontroller. The microcontroller reads the image, compares the image with the already stored images in the database. If image is equals to database then message will display on 16X2 LCD display. Otherwise unauthorized message will display and buzzer gives beep sound. For authorized entry microcontroller gives pulse to connect any peripherals.
Here we use 8051 as a microcontroller with 5v DC Power supply. Serial (UART) protocol is primary concern here. The heart of this project is Bio metric module which works on serial (UART) protocol. 16X2 LCD display is connected to microcontroller through digital I/O pins.
TECHNICAL SPECIFICATIONS:
HARDWARE SPECIFICATIONS
Micro controller : AT89S52
Crystal : 11.0592 MHz
LCD : HD44780
LED : 5mm Red LED
Bio Metric Module
Basic GPIOs
Buzzer
POWER SUPPLY
Transformer : 12V step down
Filter : 1000uf/25V
Voltage Regulator : 7805 / 7812
SOFTWARE SPECIFICATIONS
Software tools used
Keil IDE
Proteus VSM
UC flash
APPLICATIONS
Industrial
BLOCK DIAGRAM :
