Abstract :
According to ancient Greek scripts BIOMETRICS means study of life. Biometrics studies commonly include fingerprint, face, iris, voice, signature, and hand geometry recognition and verification. Many other modalities are in various stages of development and assessment. Among these available biometric traits, Finger Print proves to be one of the best traits providing good mismatch ratio and also reliable. To provide perfect security and to make our work easier, we are taking the help of two different technologies viz. EMBEDDED SYSTEMS and BIOMETRICS.
Firstly discussing about Biometrics we are concentrating on Fingerprint scanning. For this, we are using FIM 3030N/other high voltage module as a scanner. This module has in-built ROM, DSP and RAM. In this, we can store the fingerprints of up to 100 users. This module can operate in 2 modes i.e., Master mode and User mode. We will be using Master mode to register the fingerprints which will be stored in the ROM present on the scanner with a unique id.
This application will be mostly used in security buildings and constructions. The persons who want to use lift, they need use finger print module. This finger print module allow only who are already enroll. Whenever person wants to use lift, scan his image through module. If image is valid then lift doors open automatically. Otherwise it gives beep sound and door doesn’t open. If doors will open we can operate or access lift through 4X4 keypad. According to buttons pressing lift move particular stair. Lift is moving with the help of DC gear motor (10/45/60 r. p. m). The DC gear motor rotates in clock and anti clockwise directions.L293D is a driver to operate DC gear motor. The validations of image scanning, lift operation and enroll process will be displayed on 16X2 LCD. Here we use 8051 as a microcontroller with 5v DC Power supply. Serial (UART) protocol is primary concern here. The heart of this project is Bio metric module which works on serial (UART) protocol. 16X2 LCD display is connected to microcontroller through digital I/O pins.
TECHNICAL SPECIFICATIONS:
HARDWARE SPECIFICATIONS
Micro controller : AT89S52
Crystal : 11.0592 MHz
LCD : HD44780
LED : 5mm Red LED
DC gear motor (10/45/60/100 r. p. m)
L293D
Bio Metric Module
Basic GPIOs
Buzzer
POWER SUPPLY
Transformer : 12V step down
Filter : 1000uf/25V
Voltage Regulator : 7805 / 7812
SOFTWARE SPECIFICATIONS
Software tools used
Keil IDE
Proteus VSM
UC flash
APPLICATIONS
Security zones
Constructions
BLOCK DIAGRAM:
