Abstract :
This project is aimed to design a system to control the devices in homes by using DTMF technology.
In this project we can control the devices at homes from our mobile without any contact. For this we are using DTMF [Dual Tone Multi Frequency] technique which is as in build feature to few mobiles. This project is designed in such a way that the home devices are interfaced to the microcontroller [8051] through the relays along with one mobile which supports DTMF by using DTMF decoder on the receiver side. A normal mobile phone will be used as a remote control on the transmitter side some keys in mobile will be dedicated to control the devices.
A call is established between the controlling mobile and the remote mobile. Now any key pressed on the remote mobile will generate a complex frequency, which can be heard on the mobile placed. That frequency can be detected by controller by means of DTMF decoder. Keys assigned for control can be User Defined. Depending on the keys output the micro controller performs the predefined task of controlling the home appliances.
This project uses regulated 5V, 500mA power supply. 7805 three terminal voltage regulator is used for voltage regulation. Bridge type full wave rectifier is used to rectify the ac output of secondary of 230/12V step down transformer.
TECHNICAL SPECIFICATIONS:
HARDWARE:
Micro controller : AT89x series
Crystal : 11.0592 MHz
Relay
DTMF decoder
Mobile
Power supply
Transformer : 12V step down
Filter : 1000uf/25V
Voltage Regulator : 7805, 7812
SOFTWARE:
Keil IDE
UC flash
Proteus
APPLICATIONS:
- Industrial applications
- Household applications